Virtual Memory

Are you having technical problem, computer playing up, post your problems here and we will help solve them

Virtual Memory

Postby Fey390 » Mon Sep 04, 2006 8:09 pm

I keep getting a window that says that my virtual memory is low and that Windows is trying to increase it.
Is there something I can do to stop this as each time it happens, my computer runs very slow.
User avatar
Fey390
Newbie
 
Posts: 21
Joined: Fri Sep 01, 2006 10:47 am
Location: Surrey

Postby colinmcl » Mon Sep 04, 2006 8:12 pm

You can increase your swap.page file size, delete your swap/page file, in fact...

here is a good walkthrough.

Windows Virtual Memory
colinmcl
Teacher
 
Posts: 559
Joined: Tue Aug 29, 2006 3:31 am

Postby Fey390 » Wed Sep 06, 2006 3:50 pm

Thanks for the link.
Unfortunately, I am a complete thicko when it comes to computers and didn't understand a word of it. Has any body got anything that an idiot could understand?
User avatar
Fey390
Newbie
 
Posts: 21
Joined: Fri Sep 01, 2006 10:47 am
Location: Surrey

Postby monosodium » Thu Sep 07, 2006 11:22 pm

ok - try this (instructions are for Windows XP)...

click Start
right-click "My Computer"
click Properties then advanced then the top settings button (for memory usage and virtual memory)
Click Advanced then Change
Set it to "custom" and where you have the two figures for Initial and Maximum size - set them both to about double the size of RAM you have on the machine (see below).
then OK out of all the menus

SO for example, my system has 2gb of ram (approx 2000 Mb) and so my page file is set at 3000 for both the initial and maximum size.
User avatar
monosodium
Regent Empress
 
Posts: 5787
Joined: Fri Oct 21, 2005 11:52 pm
Location: In UR base snifin all UR pantys

Postby Fey390 » Fri Sep 08, 2006 9:01 am

That's brilliant - just the sort of info I need........just one problem.....it was already set up like that! However I think I might have found out what the problem is - I only have 224MB Ram. I assume this means I have the weakest computer that I could have. Can I buy more memory, and is it easy to install?
User avatar
Fey390
Newbie
 
Posts: 21
Joined: Fri Sep 01, 2006 10:47 am
Location: Surrey

Postby monosodium » Fri Sep 08, 2006 12:29 pm

224Mb is a really odd amount of memory to have... Usually memory is made in steps of powers of 2 (which 224 isn't), But unless you're going to be editing videos or doing some hardcore graphics work then you shouldn't hit that very often. But if you're hitting the limit of your virtual memory then your system is in trouble somehow so an upgrade is a good start.

If you know what you're doing then it is cheap to get and easy to install, the biggest problem being knowing what kind you need as there are a number of different types with similar desgnations. I wouldn't be happy about guiding you through it.

You may be able to find out what type you need _ through something like the crucial web site (www.crucial.com). Once you know what specification you need then you can either buy it there, or from another source like pc world (if you need it immediately) or something like eBuyer (www.ebuyer.com).

I'd suggest you assume that you're going to get rid of all the current ram you have, as the amount is odd so probably all the slots you could put ram into are full.

Installing it is a doddle, but it's easier to show than to explain. I'd get someone who "knows" to show you how to do this if you can. If you're really stuck or out on a limb then here's what to do.

If you follow these instructions then you should be safe. If you do blow up either youself, your machine, or your neighbourhood doing this then it is entirely your fault. If you've read this and don't feel that the instructions were clear then don't do it.

Do not take the memory out of the anti-static bag (yet).
Leave the machine plugged in, but turn it off at the mains! This will allow you to "ground" yourself in the absence of proper grounding straps. Pop the lid off and you should see the existing ram chips - they'll look like the ones you bought.

Touch the power supply (big self contained box where the power comes in) - this is to reduce or eliminate any static you may have stored in your body as this can destroy the memory. You can now remove the existing memory. Put the old ram in the bag just in case you need to put it back later.

There will be little clips at each end of the memory sticks, release / push these down and the memory stick will lift up so you can remove it.

When you've removed the old memory then you can insert the new stuff. It will only go in one way round and you'll need to push down harder than you think, when it's in correctly the little clips should have gone back into their original place.

Pop the lid back on and fire it up - see what happens, it should take you into an unusual screen to tell you that the ram has changed and that's ok, check the amount it says is the amount that you put in. If it doesn't then something hasn't gone right and you'll need to power down and you may need to try some of the ram in different slots. There's no exact standard way to do this, for example my system fills the slots in the order 1 - 3 - 2 -4, but some will also fill in the order 1 - 2 - 3 - 4. Usually #1 will be marked in some way on the board although you may not be able to see it. You can't kill your machine by putting ram in the wrong slot so long as it's the right kind.
User avatar
monosodium
Regent Empress
 
Posts: 5787
Joined: Fri Oct 21, 2005 11:52 pm
Location: In UR base snifin all UR pantys

Re: Virtual Memory

Postby kinkyslutlover » Sat Aug 08, 2009 1:25 am

suppliers like crucial allow you to search your current pc and buy more emmory, it's cheap as well chips these days. As said above that's a very odd amount. 1gb minimum is sensible. So maybe 2 new 512mb chips, or 1 extra 1gb. I'm not a million miles away from surrey often if you need mroe help.

Sean
Last edited by kinkyslutlover on Sat Aug 08, 2009 1:54 am, edited 1 time in total.
kinkyslutlover
Wall Flower
 
Posts: 57
Joined: Thu Aug 06, 2009 8:03 pm

Re:

Postby Robbiggie » Tue Sep 01, 2009 12:04 pm

monosodium wrote:224Mb is a really odd amount of memory to have... Usually memory is made in steps of powers of 2 (which 224 isn't),.


264mb with 40mb ish stolen for onboard graphics i reckon..

as others have mentioned used crucial.. here is a more direct link to the scanner which will identify exactly what you have and also what slots you have free etc
http://www.crucial.com/systemscanner/index.aspx

although, if you have a machine where the acceptable spec was 264mb of ram with onboard graphics as i suspect, you are probably looking at a fairly old machine, you need memory this week, but next month could be a bigger hard drive, then the motherboard could start playing up... sometimes its more effective to shop around and think about new...

prices have crashed recently, even pcworld (who i never imagined i would recommend) are doing fairly decent spec laptops at around the £300 mark (1.8ghz proc, 1gb memory, 250gb hdd), and loads of internet companies are doing them free now when you sign up for 2 years.. i sucesfully blagged one from aol when my last contract was up (i asked for a code to leave and they bribed me ;))
Robbiggie
Chatter
 
Posts: 299
Joined: Mon Jul 06, 2009 9:21 am

Re: Virtual Memory

Postby PlasticAnnArbor » Sun Sep 06, 2009 7:41 am

this thread is form 2006

it is OLD

xp will work but not well with 256 ( 512 to 2 gig is better )
PlasticAnnArbor
Chat Merchant
 
Posts: 320
Joined: Wed Jul 02, 2008 7:23 am

Re: Virtual Memory

Postby Robbiggie » Tue Sep 08, 2009 11:21 am

PlasticAnnArbor wrote:this thread is form 2006

it is OLD

xp will work but not well with 256 ( 512 to 2 gig is better )


i dont think xp does much over 1gb... mine went from 1gb to 4gb (effectively 3.5) and it had little or no effect on the actual system.. but it was as cheap to go to 4 as 2, and the laptop has shared graphics so it effectively moved it up to 500mb graphics memory which is what i needed
Robbiggie
Chatter
 
Posts: 299
Joined: Mon Jul 06, 2009 9:21 am


Return to Computer Problem Solver

Who is online

Users browsing this forum: No registered users and 0 guests